| Problem |
Cause |
Solution |
| weak processing function |
low temperature |
raise the temperature to 60-65F |
| too thin adhesive coating |
(1) too strong dilution
(2) not suitable adhesive |
(1) add new adhesive
(2) try our other specialty |
| too thick adhesive coating |
(1) too high solids
(2) water evaporate
(3) low temperature |
(1) dilute to appropriate density
(2) add water to dilute
(3) raise the temperature |
| too slow adhesive coagulate |
(1) too high temperature
(2) high moisture |
(1) lower the temperature
(2) refer to moisture form to adjust |
| too fast adhesive coagulate |
(1) not suitable adhesive type
(2) low temperature
(3) low moisture |
(1) try our other specialty
(2) raise temperature
(3) raise environment moisture |
PRODUCTS
